Technical Specifications
Description​
SOL-LED+ is a professional photoperiod regulator designed for the automatic control of LED lighting systems powered by very low direct voltage.
The device integrates functions for:
- progressive sunrise and sunset;
- annual programs and personalized programs;
- program
Manual; AstroGPS Timer;- night light;
- night inspection;
- energy saving;
- management of auxiliary relays;
- use at
1 roomor2 rooms.
General Data​
| Voice | Value |
|---|---|
| Model | SOL-LED+ |
| Technology | digital control via microcontroller |
| User Interface | display with MENU, OK, arrows and INSP. buttons |
| Available languages ​​ | 12 languages ​​ |
Power​
| Voice | Value |
|---|---|
| Rated voltage | 12-24 V DC stabilized |
| Power type | SELV, very low safety voltage |
| Direct connection to the network | not expected |
| Installation environment | internal, protected from water and condensation |
| Historical degree of protection | IP20 |
| Operating temperature | 0 °C - +40 °C |
Power must be supplied via a stabilized power supply, battery or accumulator compatible with the electrical limits of the product.
LED outputs​
The device manages two independent rooms/exits. Each room can be connected according to the type of bar used.
| Exit | Usage | Maximum current |
|---|---|---|
OUT-SG-1 / OUT-SG-2 | slashes SeasonGenerator PRO | 2,5 A for exit |
OUT-1 / OUT-2 | 2 wire commercial LED bars 12-24V DC | 2,5 A for exit |
Main light adjustment: PWM, 0 % - 100 %, limited by the Intensity' parameter.
Intensity' limit:
- minimum
10 %; - maximum
100 %; - default value
80 %.
In Seasonal mode there are Min season and Max season; the minimum cannot exceed the maximum.
SeasonGenerator PRO releases​
| Clamp | Function | Limit |
|---|---|---|
+ | positive LED bar power supply | 2,5 A max |
B | blue LED channel / night light | 100 mA max |
C | PWM sunrise/day/sunset reference | 10 mA max |
- | common negative | 2,5 A max |
2-wire outputs​
| Clamp | Function | Limit |
|---|---|---|
+ | positive LED bar power supply | 2,5 A max |
- | common negative | 2,5 A max |
Do not connect external LED drivers, LED power supplies, 230V lamps or inductive loads.
Auxiliary terminals​
| Clamp | Usage |
|---|---|
OPT-OUT - N.I. | external night inspection control, via button between N.I. and GND |
OPT-OUT - S1 | room 1 brightness sensor input, connected between S1 and GND |
OPT-OUT - S2 | room 2 brightness sensor input, connected between S2 and GND |
OPT-OUT - GND | common for N.I. button and brightness sensors |
K-1 | relay coil power supply room 1, 100 mA max |
K-2 | room 2 relay coil power supply, 100 mA max |
The K-1 and K-2 outputs deliver the same voltage with which the device is powered. Use 12 V DC relay coils if SOL-LED+ is powered by 12 V DC, or 24 V DC relay coils if SOL-LED+ is powered by 24 V DC.
The K-1 and K-2 terminals must not be used to directly power the mains, lamps or final loads.
Main Parameters​
| Parameter | Limit / value |
|---|---|
Intensity' | Fixed / Seasonal |
Mid season | 10 % - 100 %, not exceeding Max Season |
Max season | 10 % - 100 %, default 80 % |
Sunrise duration | 1 - 100 minutes |
Sunset duration | 1 - 100 minutes |
Night Light | 0 % (OFF) - 50 % |
Relay PWM ON | 0 % - 100 % |
Inspection time | 1 - 100 minutes |
Inspection time | 1 - 100 minutes |
Sensor limit | 0 % (OFF) - 100 % |
Sensitivity | 0 % (OFF) - 20 % |
Room use | 1 room / 2 rooms, default 2 rooms |
Protections​
The fuse is internal to the device and cannot be replaced by the user. In the event of failure to turn on or if the fuse is suspected to have blown, do not open the product and contact assistance or an authorized dealer.
Memory and Clock​
Settings are stored in non-volatile memory and are retained even in the absence of power.
The control unit uses a single clock for both rooms. Stanza 2 shares the same time reference as stanza 1.
Content Subject to Change​
SeasonGenerator reserves the right to modify hardware, internal software, technical features and documentation without notice.